Products
Phoroptor
Microscope
A/B SCAN
Slit lamp
Auto Lensmeter
Lensmeter
Trial Lens Set
Auto-Refractor
Instrument Table
Auto Chart Projector
Laboratory products
PD meter
Indirect Ophthalmoscope
Auto Lens Edger
LE-420 Auto Lens Edger

.The lens material: CR ,Glass, PC
.The diameter & width of diamond wheel:
PC wheel : 100x16mm
Glass wheel: 100x14mm
V groove wheel: 100x23mm
Bevel polishing wheel: 100x19mm
.Available lens range: 22-100mm
.The processing type: pointy edges, platband, flat& bevel polishing
.Gross weight: 50KGS.
.Power:110V/220V, 500W

 
NH-3 Lens Drilling Machine

DRILL FOR RIMLESS

Ideal for drilling holes in glass and plasticlenses
Opposing taper drill bits system allow holes to be drilled from both sides simultaneously for precisionplacement and avoids chipping and breaking of all lenses,especially those made of glass.After hole drilled,placed the lens under reamer and lifted upwards to be enlarged to desired size.

 
 
NH-320F Frame Heater

Technique requirements

Rated Voltage:220V 110V
Rated Frequency:50Hz 60Hz
Rated Power:600W
Heating temperature(Max.):110OC
Noise:+50dB(A)
Protection Class:Å for the Electrical Appliances

 
NH-316 Hand Edger

Features:

,High speed rotating sand wheel

,3wheels operating together,rough,fine,groove grinding

,With a special lamp,convenient operating

 

L395XW245XH295mm

110-120V/60Hz AC or
200240V/50Hz AC

120W 9Kg

 

 
NH-35W Hand Edger

Features:

,High speed rotating sand wheel

,one wheels operating together,rough,fine,groove grinding

 

L360XW200XH288mm

110-120V/60Hz AC ,
200V-240V/50Hz AC

8Kg

 

 
NH-2800 Ultralsonic Cleaner

Features:

220V/110V
35W

   
1  2 next page

Copyright (C) UNION VISION CO.,LTD. All Rights Reserved